CCNP SWITCH 642-813 Official Certification Guide (Part II – Chapter 5 VLAN Trunking Protocol)

PARTE II – Building a Campus Network

Chapter 5 – VLAN Trunking Protocol

Este capítulo cubre los siguientes aspectos:

  1. VLAN Trunking Protocol
  2. VTP Configuration
  3. VTP Pruning
  4. Troubleshooting VTP

Antes de empezar con el capítulo 5, vamos a realizar un pequeño test que consta de 12 preguntas. Al final de este capítulo pondremos las respuestas correctas.

1. Which of the following is not a Catalyst switch VTP mode?
    a. Server
    b. Client
    c. Designated
    d. Transparent

2. A switch in VTP transparent mode can do which one of the following?
    a. Create a new VLAN
    b. Only listen to VTP advertisements
    c. Send its own VTP advertisements
    d. Cannot make VLAN configuration changes

3. Which one of the following is a valid VTP advertisement?
    a. Triggered update
    b. VLAN database
    c. Subset
    d. Domain

4. Which one of the following is needed for VTP communication?
    a. A Management VLAN
    b. A Trunk link
    c. An Access VLAN
    d. An IP address

5. Which one of the following VTP modes does not allow any manual VLAN configuration
    changes?
    a. Server
    b. Client
    c. Designated
    d. Transparent

6. Select all the parameters that decide whether to accept new VTP information:
    a. VTP priority
    b. VTP domain name
    c. Configuration revision number
    d. VTP server name

7. How many VTP management domains can a Catalyst switch participate in?
    a. 1
    b. 2
    c. Unlimited
    d. 4096

8. Which IOS command configures a Catalyst switch for VTP client mode?
    a. set vtp mode client
    b. vtp client
    c. vtp mode client
    d. vtp client mode

9. What is the purpose of VTP pruning?
    a. Limit the number of VLANs in a domain
    b. Stop unnecessary VTP advertisements
    c. Limit the extent of broadcast traffic
    d. Limit the size of the virtual tree

10. Which VLAN number is never eligible for VTP pruning?
    a. 0
    b. 1
    c. 1000
    d. 1001

11. Which of the following might present a VTP problem?
    a. Two or more VTP servers in a domain
    b. Two servers with the same configuration revision number
    c. A server in two domains
    d. A new server with a higher configuration revision number

12. If a VTP server is configured for VTP version 2, what else must happen for successful
    VTP communication in a domain?
    a. A VTP version 2 password must be set.
    b. All other switches in the domain must be version 2 capable.
    c. All other switches must be configured for VTP version 2.
    d. The VTP configuration revision number must be reset.

Saludos a tod@s,

JMHAlegre

Esta entrada fue publicada en CCNP SWITCH 642-813 Official Certification Guide (Part II – Chapter 5 VLAN Trunking Protocol), Cisco, SWITCH 642-813 y etiquetada . Guarda el enlace permanente.

Responder

Introduce tus datos o haz clic en un icono para iniciar sesión:

Logo de WordPress.com

Estás comentando usando tu cuenta de WordPress.com. Cerrar sesión / Cambiar )

Imagen de Twitter

Estás comentando usando tu cuenta de Twitter. Cerrar sesión / Cambiar )

Foto de Facebook

Estás comentando usando tu cuenta de Facebook. Cerrar sesión / Cambiar )

Google+ photo

Estás comentando usando tu cuenta de Google+. Cerrar sesión / Cambiar )

Conectando a %s